The YewdaleDefiant® C49 electric cassette blind with side channels features a 7.4v DC battery powered tubular motor.
Choose between our standard rounded headbox or our new square headbox.
Our C49 electric cassette blind can be top or face-fixed. It accommodates a 40mm grooved aluminium barrel which houses the motor. The motor makes operation easy thanks to its remote control, with a quiet and soft start/stop motion and electronic stops.
The fabric is locked into a groove in the barrel with studs fitted at the edge of the fabric to retain it within the side channels.
Comes with an aluminium bottom bar and black or white hardware as standard.
The C49 cassette blind is easy to install using our goalpost installation technique. Simply connect the side channels to the headbox and fit the blind via the side channels.
- Square or rounded headbox
- Black or white hardware as standard
- Tracker fabric retaining system
- Available in any RAL colour
The YewdaleDefiant® C49 electric cassetted blind with side channels as manufactured by Yewdale, +44(0)1268 570900. Flame retardant fabric from the YewdaleDefiant® range, locked into a grooved 40mm aluminium barrel along with an aluminium bottom bar as standard. 7.4v DC motor housed within a black/white aluminium cassette with side channels and bottom bar.
Please refer to NBS Plus N10 240.
Cassette size (HxD): 77 x 73mm**105 x 95mm
Barrel Size Ø: 40mm**40mm
Side Channel Size (WxD): 55 x 13mm**55 x 13mm
Based on fabric weight of 400g/m², e.g. Dart. Larger sizes may be possible with lighter/thinner fabrics. Sizes shown in millimetres unless otherwise specified.
|C49-60 recess size width minus 2mm & drop minus 2mm = Blind size minus 43mm = fabric width|
C49-90 recess size width minus 2mm & drop minus 2mm = Blind size minus 43mm = fabric width
|C49-60T recess size width minus 2mm & drop minus 2mm = Blind size minus 79mm = fabric width|
|C49-90T recess size width minus 2mm & drop minus 2mm = Blind size minus 79mm = fabric width|