K09 Mounting Plates
Many items may be converted to anti-ligature status by mounting them on YewdaleKestrel® mounting plates. Available in three sizes, the plates are held vertically against the wall solely by the magnetic attraction of the YewdaleKestrel® brackets hidden behind them.View full details
- Enquire about this product
Select and download from the fabric selectors below.
|Suitable for roller blinds||Yes||Yes||Yes||Yes||Yes||Yes|
|Suitable for vertical blinds||Yes||Yes||Yes||Yes||Yes|
|Wipe with damp sponge||Yes||Yes||Yes|
|Suitable for moist conditions||Yes||Yes||Yes||Yes||Yes||Yes||Yes|
The sleek design of these K09 backing plates means that they blend in almost seamlessly into any given environment. They are held to the wall by hidden magnets and can be used on many fixed products to convert them to a fail-safe solution. Designed to securely hold a whole host of products to provide a practical, user-friendly, non institutionalised, fail-safe solution of mounting a variety of different sized products.
K09AW - 70 x 155mm, with 1 bracket. Suitable for toilet roll holders etc.
K09BW - 190 x 335mm, with 2 brackets. Suitable for soap dispensers etc.
K09CW - 330 x 470mm, with 3 brackets. Suitable for towel dispensers etc.
Kestrel K09A/B/CW Mounting plates for fixing standard accessories to, to enable them to be used with confidence in ligature-proof environments, as manufactured by Yewdale, +44 (0)1268 570900. Anti-shatter ABS plastic, complete with magnetic bracket(s) to allow plate to part from bracket(s) under excessive load.
It is an NHS Estates requirement that items suspended on load-release support systems should be maintained and load-tested in accordance with the manufacturer’s instructions on an annual basis. The YewdaleKestrel® system is maintenance free and its performance remains constant even after repeated use. It is a requirement, however, to carry out a physical inspection of YewdaleKestrel® fittings to identify any possible damage or evidence of tampering.
Sensitive electronic equipment may be damaged by proximity to a magnetic field and should not come within 150mm of the underside of the brackets. Any load-release device, by its nature, may cause damage when operated. Articles suspended from the YewdaleKestrel® magnetic anti-ligature system will come down when pulled.
YewdaleKestrel® products are designed as standalone products only. Care should be taken when assessing or arranging a room to ensure that YewdaleKestrel® products cannot be misused in conjunction with any other item, furniture or fixings in the room. It is the responsibility of the end user or client to ensure the product is suitable for the environment it is being installed in. YewdaleKestrel® products must be fitted by a qualified professional following the manufacturer’s instructions. Failure to do so could jeopardise the product’s effectiveness as an anti-ligature system.